Changes

Jump to navigation Jump to search
no edit summary
Line 19: Line 19:  
We got all these servers right? Well they ain't no good until there's a network. You do this stage in [[The Hub]].
 
We got all these servers right? Well they ain't no good until there's a network. You do this stage in [[The Hub]].
    +
* urysw4 should come up on its own, as it has PoE [???] - check the injector is on
 
* Power on urysw3 (The HP ProCurve 2626 [The top one])
 
* Power on urysw3 (The HP ProCurve 2626 [The top one])
 
* Power on urysw1 (The Netgear GS748T [The bottom one])
 
* Power on urysw1 (The Netgear GS748T [The bottom one])
Line 44: Line 45:  
We identify critical servers as those that enable us to broadcast on AM. URY Policy states that we must have '''two''' operating loggers before restoration of AM service. You'll also want the jukebox to play some noise.
 
We identify critical servers as those that enable us to broadcast on AM. URY Policy states that we must have '''two''' operating loggers before restoration of AM service. You'll also want the jukebox to play some noise.
   −
* Power on [[jukebox]] in [[The Hub]]
+
* Power on [[uryfw0]]
* Power on [[logger1]]
  −
* Power on [[logger2]]
   
* Power on [[uryred]]
 
* Power on [[uryred]]
 
* Power on [[uryblue]]
 
* Power on [[uryblue]]
* On logger1, run `/usr/local/etc/rc.d/audiolog.sh start`
+
* On both the loggers, run <code>sudo service loggerng status</code> and start it if it fails to auto-start
* On logger2, run `/etc/rc3.d/S40audiolog start`. You may also need to `modprobe es1370`
+
* Power on [[dolby]]
* Power on [[uryfw0]]
+
* If you don't get audio, run <code>cd /usr/local/etc/liquidsoap/scripts && sudo ./startAudio.sh</code>
 
  −
If at any stage you are unhappy with the noises, smells, or LED blink patterns on logger1 or logger2, '''stop''', turn that machine back off, and come back to it. If both are not running, you will need to investigate this before you continue - uryred is not currently considered a stable logger so is not a valid substitute. Generally, they'll work when you try again a little later (they don't like being cold).
     −
Jukebox should boot up happily, and the station will start outputting a loop of Monty Python's ''Intermission'', occasionally overlaid with a grammatically incorrect technical difficulties message from Alex Boyall.
+
The station should start outputting the world's most annoying loop, featuring a happy instrumental tune and someone telling you that we're off air right now. We're most definitely not.
 +
:* If it tries to play a jingle, this might fail spectacularly and go to a loop of Monty Python's Intermission, featuring Alex Boyall giving a grammatically incorrect technical difficulties message.
    
== AM Broadcast ==
 
== AM Broadcast ==
Line 76: Line 74:  
Core Computing Services are defined as those which must be operational for URY to broadcast anything other than [[iTones]] (or, at this point, Intermission).
 
Core Computing Services are defined as those which must be operational for URY to broadcast anything other than [[iTones]] (or, at this point, Intermission).
   −
* Power on [[uryfs1]] and [[themis]]
+
* Power on [[urybackup0]] and [[urysteve]]
* '''Wait''' for uryfs1 to finish booting as most other systems are dependent on it
+
* ''Wait'' for urysteve to finish booting
* Run `mount -t ext4 /dev/sdb1 /music` on uryfs1
   
* Power on [[ury]]
 
* Power on [[ury]]
 +
* Ensure selector is powered in The Hub
 
* Fade up jukebox in [[Studio 1]], then switch to S1 then back to S3
 
* Fade up jukebox in [[Studio 1]], then switch to S1 then back to S3
 
** This ensures selector state is up to date
 
** This ensures selector state is up to date
 +
** Jukebox should now be playing actual music. You might need to restart it if it's stuck on techlude - on Dolby, <code>cd /usr/local/etc/liquidsoap/scripts && sudo systemctl stop ury-jack && sudo ./startAudio.sh && sel 8 && sel 3</code>
   −
That's the absolute basics. Themis is also pretty much optional, but as it provides some authentication and DNS services, it's best we bring it up too. Now verify the following are accessible and functioning:
+
That's the absolute basics. Now verify the following are accessible and functioning:
    
* http://ury.org.uk/
 
* http://ury.org.uk/
* https://ury.org.uk/myury/
+
* https://ury.org.uk/myradio/
* https://ury.org.uk/sis2/
   
* https://ury.org.uk/roundcube/ (including sending test emails both internally and externally)
 
* https://ury.org.uk/roundcube/ (including sending test emails both internally and externally)
 
** It is possible that mta.york.ac.uk is not yet back online, or that it is but refuses to route mail. You can test this with good ol' `telnet mta.york.ac.uk 25`
 
** It is possible that mta.york.ac.uk is not yet back online, or that it is but refuses to route mail. You can test this with good ol' `telnet mta.york.ac.uk 25`
 
* http://ury.org.uk/live/
 
* http://ury.org.uk/live/
* live-high, live-mobile, live-high-ogg, jukebox and campus-playout streams are visible at http://uryfs1.york.ac.uk:7070/
+
* live-high, live-mobile, live-high-ogg, jukebox streams are visible at https://audio.ury.org.uk/status
* iTones should now be playing music instead of intermission. If not, try remounting manually or restarting share daemons on uryfs1
   
* BAPS (studio1, studio2 and production services)
 
* BAPS (studio1, studio2 and production services)
* Timelord (will probably need an `F5` on jukebox)
+
* Timelord (might need a reboot on eccleston/tennant/smith)
 
* myradio_daemon
 
* myradio_daemon
   Line 104: Line 101:  
** Use https://urybsod.york.ac.uk/xymon/ to monitor other services
 
** Use https://urybsod.york.ac.uk/xymon/ to monitor other services
 
** https://ury.org.uk/loggerng/ should now be available
 
** https://ury.org.uk/loggerng/ should now be available
* copperbox
  −
** http://copperbox.york.ac.uk/ should now be available
  −
** Webcams should now be available (motion and camd may need manually restarting)
  −
* urybackup0
  −
** Run `zfs mount -a`, `service nfsd restart`, `service mountd restart`
  −
** Windows and backup filestores should now be available. Mount the backup filestores on ury and uryfs1.
   
* uryrrod
 
* uryrrod
** Only provides mixclouder service, will have no immediate noticable impact
+
** Only provides mixclouder service and webcams, will have no immediate noticable impact
 +
* urystv
    
== Nearly Done ==
 
== Nearly Done ==
Everything should be bright and cheery again now. You should now complete a full incident report, making it available online in [[:Category:Incident Reports]] and sending it to computing@ury.org.uk, engineering@ury.org.uk and management@ury.org.uk.
+
Everything should be bright and cheery again now. You should now complete a full incident report and make it available online in [[:Category:Incident Reports]].
    
Ideally, you'd also act on any recommendations this review brings up to make things run better in future.
 
Ideally, you'd also act on any recommendations this review brings up to make things run better in future.
    
[[Category:Technical How-Tos]]
 
[[Category:Technical How-Tos]]

Navigation menu